-
POSITION PURPOSE
The Test Tank Operator is a member of the coil manufacturing team and is responsible for following standard work to test a wide variety of coil units in a safe manner.
The Test Tank Operator works as member of the larger plant assembly team and may flex to any of the departments or workstations as volume dictates. The employee demonstrates BAC’s values of Earning Trust, Embracing Responsibility, Showing Courage, and Driving Innovation, and is committed to achieving technical expertise in their department.
The purpose for every position at BAC regardless of department or level can be summed up as doing the right thing in the right way.
KNOWLEDGE & SKILLS
* The Test Tank Operator will be responsible for Leak test coils using nitrogen under water.
PRINCIPAL ACCOUNTABILITIES
* Read and interpret blueprints and dimensional drawings
* Attach a variety of leak test fittings (NPT, Sweat, Grooved)
* Leak test coils using nitrogen under water
* Repair braze joints using single- and dual-tip oxy-fuel torches
* Clean joints of work pieces, as directed
* Examine parts and re-braze defective joints
* Apply product safety labels, as required
* Select torch tip, flux, and brazing alloy from data charts or work order
* Understand all measurement equipment used in department (caliper micrometers, protractor, tape measure etc.)
* Safely operate JIB cranes to lift, move, and position components.
* Basic math skills
* Utilize standard work to assemble mechanical support assemblies in a safe and quality conscious manner eliminating risk of damage.
* Meet daily production goals as assigned.
* Assist with the replenishment and organization of the work area.
* Follow all safety requirements regarding tools and PPE.
* Maintains and sustain 5’s in the department.
* Actively acquire skills and ability to support the highest quality standards.
* Flex to other areas as needed demonstrating teamwork and a commitment to team success
* Perform all other tasks as directed by the supervisor.
* Other duties as assigned
Experience:
Six (6) Months of related experience – Brazing / using single- and dual-tip oxy-fuel torches / experience with JIB crane lifts
WORKING CONDITIONS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is regularly required to stand and walk up to 50% of the time. Working conditions include those of a normal construction environment, as well as standard hazards associated with installed HVAC equipment and rotating equipment.
This position requires occasional lifting of up to 50 lbs.
Equal Opportunity Employer/Protected Veterans/Individuals wi...
....Read more...
Type: Permanent Location: Dayton, US-TN
Salary / Rate: Not Specified
Posted: 2026-05-12 07:43:53
-
POSITION PURPOSE
A shop hourly position with the primary responsibilities of ensuring the accurate and timely kitting and movement of materials in support of the plant production lines. As an experienced mechanic, the Mechanic II has a high level of proficiency in how to effectively support the assembly and fabrication teams through accurate material movement, stockroom replenishment, and support of the shipping team. The successful candidate will be able to prioritize and flex to several workstations as needed. The Mechanic II models BAC’s values of Earning Trust, Embracing Responsibility, Showing Courage, and Driving Innovation to co-workers. The purpose for every position at BAC regardless of department or level can be summed up as doing the right thing in the right way.
PRINCIPAL ACCOUNTABILITIES
* Owns personal and team safety. Observes all safety rules and uses the proper safety equipment at all times.
* Plan and coordinate the flow of materials in support of the plant manufacturing process; provide a high level of customer focus to plant production.
* Knowledgeable of and meets quality standards on a consistent basis.
* Committed to achieving departmental safety goals.
* Maintains and sustain 5’s in the department.
* Safety operate JIB cranes to lift, move, and position components.
* Serve as a spotter for Shipping Team when clearing lines, loading trucks, or moving units in the yard, to reduce risk and prevent damage.
* Accountable for department performance
* Participate in efforts to continuously improve the Materials Team, resulting in cost outs and process improvements
* Ability to support production through accurate material movement, stockroom replenishment, and support of the shipping team as required.
* Continuously grow skills and expertise in order to flex to the maximum number of workstations.
* Identify shortages to production and coordinate solution in partnership with purchasing.
* Accurately complete paperwork or online data entry required by department.
* Execute movement of sheet metal material from the end of final weld to the assembly lines
* Handle the movement of kitted material to the production departments
* Ensure product is delivered to the correct location on time
* Maintain a neat and orderly staging area for all material
* Perform other duties as requested, directed and assigned.
* Ensure individual activities embrace sustainability, reduce the impact on the environment, minimize waste, maximize recycling, minimize energy and water usage.
* Support a culture of innovation through original thinking to improve processes methods, systems or services; translates new ideas into business opportunities.
NATURE & SCOPE
This position will report to the Materials Supervisor or Group Leader as assigned. Work will primarily be within the Materials Department, and can vary between material mov...
....Read more...
Type: Permanent Location: Dayton, US-TN
Salary / Rate: Not Specified
Posted: 2026-05-12 07:43:50
-
QC Inspector
SUMMARY
Plans and directs activities concerned with development, application, and maintenance of quality standards for industrial processes, materials, and products. Tests and inspects products at various stages of the production process and compiles and evaluates statistical data to determine and maintain quality and reliability of products by performing the following duties.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
* Provide quality control final inspection support, and shipping / receiving inspection support.
* Accurately interpret engineering drawings, customer specifications, company specifications, sampling procedures, designs, forms, and instructions for recording, evaluating, and reporting quality and reliability data.
* Utilize precision tools and equipment with accuracy for testing and measurement of products.
* Recommend modifications of existing quality or production standards to achieve optimum quality within limits of equipment capability.
* Other duties as assigned.
QUALIFICATIONS:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
* Must have Basic Computer Proficiency to include fundamental tasks such as email, word processing software, creating and maintaining spreadsheets in MS Excel and navigating Operating systems.
EDUCATION and/or EXPERIENCE:
* Associate degree in an aviation related field preferred
* At least 1-year relevant aviation work experience
* Minimum of 2 years’ experience in basic dimensional/visual inspection required on aviation related equipment (airframe, powerplant, and or avionic)
* Certify visual acuity to NAS-410
* Airframe and Powerplant FAA certifications preferred
....Read more...
Type: Permanent Location: Oldsmar, US-FL
Salary / Rate: 24.945
Posted: 2026-05-12 07:38:12
-
Position Summary
The Advanced Maintenance Technician is a key member of the Maintenance and Reliability team, responsible for performing preventive maintenance, troubleshooting mechanical and electrical issues, and completing production maintenance work orders safely and accurately.
Working under the direction of the Maintenance Manager or Senior Maintenance Technician, this role supports plant operations by ensuring equipment reliability, adhering to established processes, and maintaining proper documentation.
The technician demonstrates BAC’s core values—Earning Trust, Embracing Responsibility, Showing Courage, and Driving Innovation—while consistently striving for technical excellence.
Key Responsibilities
Maintenance & Troubleshooting
* Perform preventive maintenance (PMs) on major plant equipment.
* Diagnose and repair mechanical, electrical, hydraulic, pneumatic, and power‑transmission systems.
* Complete breakdown repairs, equipment changeovers, and benchwork activities such as rebuilds, cleaning, and operational checks.
* Work from technical manuals, specifications, shop drawings, and schematics.
* Conduct seasonal maintenance and facility equipment checks as required, including during non‑standard work hours.
Safety & Compliance
* Follow all safety rules, procedures, and PPE requirements.
* Safely operate material‑handling equipment (pallet jacks, lift trucks, jib/gantry cranes) and man lifts.
* Use hand and power tools appropriately and maintain a clean, organized, and safe work area.
* Complete required inspections, documentation, and in‑process quality checks.
Communication & Collaboration
* Communicate machine status and issues with the Maintenance Manager, Senior Maintenance Technician, production teams, and the Shift Manager.
* Train and support junior mechanics.
* Collaborate with maintenance and production personnel to meet daily work order priorities and project milestones.
Continuous Improvement
* Apply basic LEAN principles, including 5S and continuous improvement practices.
* Support sustainability initiatives and activities that reduce energy use and waste.
* Maintain accurate after‑action reports, procedures, and maintenance records.
* Replenish parts, tools, and consumables as needed.
Additional Facilities Support
* Perform basic facility upkeep including painting, drywall work, and plumbing repairs.
Qualifications & Skills
* 3-5 years of mechanical maintenance or related industrial mechanical experience required.
* Knowledge of metal fabrication tools and equipment- such as lasers, press brakes, thermoforming, and robotics preferred but not required.
* Strong mechanical and electrical troubleshooting skills.
* Ability to read schematics, wiring diagrams, and use a digital multimeter (DMM).
* Proficient in math, including fractional and decimal calculations.
* Ability to locate and us...
....Read more...
Type: Permanent Location: Milford, US-DE
Salary / Rate: Not Specified
Posted: 2026-05-12 07:38:02
-
POSITION PURPOSE
A shop hourly position with the primary responsibilities of planning, organizing, and directing work activities for a small team of Assembly, Tri-Armor, and Welding personnel in the Pan Factory.
As a senior mechanic, The Pan Assembler I is an influencer, who leads junior mechanics or teams as assigned and demonstrates BAC’s values of Earning Trust, Embracing Responsibility, Showing Courage, and Driving Innovation.
The Mechanic I will also be required to train and mentor junior mechanics and assist the department leadership team with daily assignments as directed.
The purpose for every position at BAC regardless of department or level can be summed up as doing the right thing in the right way.
PRINCIPAL ACCOUNTABILITIES
• Owns personal and team safety.
Observes all safety rules and uses the proper safety equipment at all times.
• Plan, organize, and direct activities in the Pan and Tri-Armor Departments; Responsible for coordinating the on-time delivery of Pan’s to all assembly lines in partnership with the day time Station Leader.
• Responsible for the daily, weekly, and monthly sign-off of the TriArmor work procedure checklist.
• Provide oversight and guidance for the welding passivation process in the Pan Department; Maintain proper inventory of consumables in partnership with the Station Leader.
• Ensure all Pans are tested in line with BAC’s quality requirements.
• Utilize standard work to assemble mechanical support assemblies to specification.
• Operate equipment in a manner that maximizes productivity and quality to meet or exceed production goals for the shift.
• Safely operate jib cranes and/or overhead cranes to lift, move, and position components.
• Train junior mechanics of the team to achieve technical and professional expertise.
• Provide leadership to the team in the absence of the Shift Lead and or Team Leader.
• Able to participate in regional projects if needed.
• Operate as an influencer and subject matter expert
• Understand departmental metrics and communicate / interpret for junior mechanics.
• Update and post metrics as assigned.
• Accurately complete paperwork or online data entry required by department.
• Document processes for knowledge capture and the training of junior mechanics.
• Maintains and sustain 5S standards in the department.
• Participate in continuous improvement activities and projects.
• Contribute to departmental safety improvements and initiatives.
• Aggressively uphold and support quality and process standards
• Mentors and drives LEAN principles in the area.
• Ensure individual activities embrace sustainability, reduce the impact on the environment, minimize waste, maximize recycling, minimize energy and water usage.
• Support a culture of innovation through original thinking to improve processes, methods, systems or services; translates new ideas into business opportunities
• Perform other duties as assigned by plant leadersh...
....Read more...
Type: Permanent Location: Milford, US-DE
Salary / Rate: Not Specified
Posted: 2026-05-12 07:37:59
-
Assembler, General
ABOUT LCI
The mission of LCI is to provide meaningful employment for the blind and visually impaired.
We accomplish this in four ways:
* EMPLOY: We are one of the largest employers of people who are blind, creating meaningful careers and lasting skills that transform their lives.
* BUILD: We create over 2,000 products and distribute thousands more through manufacturing, retail, nationwide distribution, and e-commerce channels.
* SERVE: Many of our products are sold directly to the federal government.
We were pioneers of “base supply centers,” stores on military bases that employ the blind and visually impaired and provide mission-critical supplies to our nation’s military.
* SUPPORT: We want to end blindness forever.
To that end, we engage in philanthropic efforts for research into blindness and treatment for the visually impaired.
ABOUT THIS ROLE
The General Assembler job involves material assembly, equipment operations, decision making, ability to show attention to quality detail work, and the ability to multitask.
An employee that is dedicated to safety, quality and meeting the needs of our customer.
LOCATION AND SCHEDULE
Jackson, MS
Monday-Friday 7:30 AM – 4 PM
KEY RESPONSIBILITIES
* Must be able to communicate effectively with co-workers, supervisors and managers.
Prior manufacturing experience preferred.
QUALIFICATIONS
* Basic reading and math skills.
Previous production experience needed. Three to six months related experience and/or training.
* Follow standardized procedures to operate machinery used in the production process and/or to assemble parts on an assembly line.
* Perform general manual activities and tasks in an industrial environment.
* Operate machinery to assist in the production process
* Assemble materials and equipment as required to perform assigned tasks.
* Meet daily production goals.
* Maintain a safe and clean working environment by complying with all safety guidelines, procedures, and regulations.
* Inspect products to verify conformance to quality standards
* Complete equipment checks for all equipment prior to the start of production
* Perform manual dexterity work involving the use of fingers, hands, arms, and legs
* Inspect, pack and label per customer specifications using safe work practices.
* Moderate Lifting
* Prolonged sitting or standing
* Contribute to a diverse team, working toward a common goal.
* Perform other duties as assigned or needed.
Why LCI?
* Purpose-driven company driven by principles, not profit
* Reach your highest potential: upward mobility, rewarded through hard work
* Competitive salary and compensation
* Basic Life Insurance at no cost to the employee
* 401(k) with match and Surplus-Sharing Plans
* Health, Dental, and Vision Insurance
* Ten paid holidays annually
* Paid Time Off (PTO)
* On-s...
....Read more...
Type: Permanent Location: Jackson, US-MS
Salary / Rate: Not Specified
Posted: 2026-05-12 07:37:44
-
Electrical & Instrumentation Inspector (Casual Part Time)
Intertek is searching for a Electrical & Instrumentation Inspector to join our Technical Inspection Services team in Ontario, Canada.
This is a fantastic opportunity to grow a versatile career in Inspection Services!
The Electrical & Instrumentation Inspector is responsible for performing visual inspection of materials and/or fabricated equipment at vendor shops or on-site fabrication or testing facilities.
The ideal candidate must be well versed in quality control inspections and tests, including nondestructive testing techniques, mechanical testing, dimensional inspection, pressure testing and coating inspections.
This position will travel at least 50% of the time.
Shift/Schedule: All inspectors are utilized on an Adhoc basis and are not provided daily duties.
All needs are based on our clients’ needs and we source inspectors based on availability, location, taxonomy approvals, and specific client requests..
What you’ll do:
* Perform inspections or audits and reviewing testing for conformance to Client specifications, industry standards, and approved procedures and reporting of results
* Review material test reports to conformance with applicable codes and standards
* Perform the follow-up of dispositions and corrective actions related to non-conformances
* Document inspection activities in electronic formats
* Evaluate and agree upon project quality procedures, standards, and specifications ensuring that all parties (engineering, procurement, manufacturing) are adhering to them
* Review Inspection & Testing Plans to ensure a standardized minimum level of surveillance in accordance with the contractual requirements.
Identify the critical inspections and tests to be witnessed by the Owner
* Carry out inspection visits as per ITP’s either personally or through 3rd party resource
This position outline is a general guideline and does not represent all encompassing details.
The position assumes that the incumbent has both the mental and physical requirements to carry out the above defined duties.
What it takes to be successful in this role:
Minimum Requirements & Qualifications:
* High School Diploma or GED, Trade School, On-The-Job Training or University Diploma
* 5+ years of third-party vendor inspection, expediting or auditing experience
* Experience in quality control inspections and tests, including nondestructive testing techniques, mechanical testing, dimensional inspection, pressure testing and coating inspections
* Technical training in subjects, such as, but not limited to quality, NDT, blueprint reading, industry standards, auditing, expediting, materials, welding, coatings, electrical components, instrumentation, pressure testing, well control, equipment operation and assembly
* Must have experience with Mechanical/Pressure Vessels and lifting equipment
* Must have basic knowledge of material propert...
....Read more...
Type: Permanent Location: Mississauga, CA-ON
Salary / Rate: Not Specified
Posted: 2026-05-12 07:37:02
